RF (Radio Frequency) Wireless Magentic Sensor
For Door Contact, Window Contact, Cabinet Gap Contact
Frequency 433Mhz, Code 1527 or 2262
 
 
Homtrol New Design Intelligent Magnetic Door and Window Sensor a
Homtrol New Design Intelligent Magnetic Door and Window Sensor c
 
 
 
Homtrol HT-21 New Design Smart Home Security Automation Door, Window, Cabinet Sensor

Smart RF Door Sensor is used with RF compatibile Alarm System or Homtrol series of Smart Home Security WiFi IP Camera. Worried about security protection to your doors, windows or cabinets? Include this sensor and add extra protection. With Homtrol IP Camera, you can set sensor preset view thus when alarm is triggered, the camera can rotate to 5 preset points (preset points are fixed at 5 angles) to capture image and view.


Specifications:
Housing: ABS Plastics
Alarm protocol code: RF 433Mhz protocol
Alarm mode: Send alarm signal to Homtrol IP Camera or Alarm system hosts.
Transmission Distance: About 10m to 30m.
Battery Life Time: About 6 to 12 months
Alerts: Low Battery Alerts
Indicator Light: Neon Blue
Color: White with Red Stripe
Dimension: 70mm * 50mm * 20mm
   
How to use:
- Install battery
- Turn on the alarm, 10 to 15 seconds will ready for alarm
- Learn code with Homtrol IP cameras or alarm host
- When triggered, sensor will send signal to Homtrol IP cameras or alarm host


PS: This sensor does not work standalone. It has to be paired to Homtrol IP Camera or Alarm hosts with RF 433Mhz to use. 
** Batteries not included due to shipping restrictions. Sensor uses 2X CR2025 Flat 3V Batteries.
 
 
Specifications:
Housing: ABS Plastics
Alarm protocol code: RF 433Mhz protocol
Alarm mode: Send alarm signal to Homtrol IP Camera or Alarm system hosts.
Transmission Distance: About 10m to 30m.
Battery Life Time: About 6 to 12 months
Alerts: Low Battery Alerts
Indicator Light: Neon Blue
Color: White with Red Stripe
Dimension: 70mm * 50mm * 20mm
   
How to use:
- Install battery
- Turn on the alarm, 10 to 15 seconds will ready for alarm
- Learn code with Homtrol IP cameras or alarm host
- When triggered, sensor will send signal to Homtrol IP cameras or alarm host


PS: This sensor does not work standalone. It has to be paired to Homtrol IP Camera or Alarm hosts with RF 433Mhz to use. 
** Batteries not included due to shipping restrictions. Sensor uses 2X CR2025 Flat 3V Batteries.